Dry Mortar Production Line

Home > Insulation Material Machinery > Dry Mortar Production Line

In contrast to job-site mortars, dry mortar is also called pre-mixed mortar, which is produced in the factory with dedicated facilities on batching and blending of ingredients in highly-controlled process. It can be used directly just by adding water in job site.

It has advantages of consistent quality, controlled inventory, saving time and labour costs. By adding different chemical additives, it has fine properties of bond, thermal and acoustic insulation, crack-resistance, workability, water-retention, wear-proof, anti-corrosion, etc.
Dry mortar can match different kinds of new construction materials by improving formulation. These good properties not only improve building's quality and life greatly, but also decrease the usage of mortar in a large degree. The demand for dry mortar has increased rapidly due to its outstanding merit comparing with the mortar made in job-site.

MODE	CAPACITY	AREA	HEIGHT	REMARK
Simple	1~15t/h	40m²	5~10m	Manual batching and packing
Basic	5~15t/h	40-60m²	6~10m	Manual batching, automatic packing
Semi-automatic Serial	5~15t/h	40~80m²	8~12m	Automatic batching of coarse material, manual batching of additive, automatic packing
Semi-automatic Tower	5~50t/h	40~100m²	10~25m	Automatic batching of coarse material, manual batching of additive, automatic packing
Fully Automatic Tower	5~100t/h	60~500m²	10~25m	Automatic batching of all raw material and packing

1. Bonding mortar: Masonry mortar, wall and floor tile adhesive mortar, anchorage mortar etc.
2. Decoration mortar: Decorative plaster, inner and outer wall putty, colorful decoration mortar etc.
3. Protection mortar: Water-proof mortar, anti-corrosion mortar, self-leveling mortar, wear resistance mortar, thermal insulation mortar, sound insulation mortar, repair mortar, mildewproof mortar, shielding mortar etc.

1.Binders: Cement, hydrated lime, anhydrite, gypsum.
2. Filler: Silica sand, quartz sand, limestone, dolomite, expanded perlite etc.
3. Mineral admixture: Ground granulated blast furnace slag, fly ash, pozzolana, fine silica powder etc.
4. Water-retention and thickening material.
5. Chemical additives: Cellulose esters, superplasticizer, air entraining agents, accelerating agents, retarding agents, defoaming agents, hydrophobic agents, and etc.

Raw Material Storage Silos / Sand Drying Unit / Bucket Elevator / Spiral Conveyor / Weighing System / Mixer / End Product Silo / Bagging System / Dedusting System / Computer Control System / Air Compressor / Air-phase Balance System / Steel Structure / End Products Storage Silos